Origin	China
Brand Name	aubi

All-Steel frame

Dimension of the topper cabinet body: (L1500*W800*H1500)±10mm

The thick of worktop: 13mm Phenolic Resin worktop

Dimension of the base: (L1500*W800*H825)±10mm

The height between the worktop and the ground is 850mm±10mm

The available room for working(when closing the view window): L1360*W800*1200mm including and above

Cabinet combination: three segments combination, topper cabinet body(expelling of toxin cabinet), middle cabinet body(worktop), low base cabinet(the one side freestanding storage cabinet and another side independent water, electrical and gas pipe system accomodating cabinet design)

Shell of the fume hood: high-quality cold-rolled steel, bended and shaped, the thickness is 1.0mm for the wall. cleaned with acid and phosphorus,coated with static epoxy powder

Interior panel: original import fujiamei 6.0mm compact panel specialize in acid and alkali resistant

Baffle plate: the material is the same as interior panel, the excellent design for the position and angles of the baffle plate makes the air uniform distribution, no blind angle.

in order to make all gas exhaust out.

Worktop: 12.7mm Phenolic Resin sepcialized used in laboratory, edge double layers upset, acid and alkali resistant, corrosion-proof. Technical details: bending strength≥259MPa; tensile strength≥113Mpa, compression strength≥152Mpa(vertical) and ≥147Mpa(horizon); Rockwell hardness≥69; water absorption≥0.71%; corrosion-proof; acid and alkali resistant for 24 hours one day. Density≥1.4g/cm3.

Shell of the fume hood: high-quality cold-rolled steel, bended and shaped, the thickness is 1.0mm for the wall. cleaned with acid and phosphorus,coated with static epoxy powder

Door panel for bottom cabinet: high-quality cold-rolled steel, bended and shaped, double constructure for inside and outside, deadening is filled inside

Auxiliary air intake: placed below the foreplate of the fume hood, punched of cold-rolled steel. It can provide the air source and reduce the air torrent below the viewing window when the view window is close.

Adjustable door

Track: stainless steel

When we install the right and left hanging steel rope, the steel cable should be completely hidden in the track that can guarantee the safe of the steel rope and prevent chemical corrosion by not rubing with the track when the steel cable is pulled up and down.

In order to make the user push the door up and down convenient, we should make the design of the handle of the adjustable door meet the human engineering theory.

The height of the adjustable door is not less than 670mm when it is fully open

Glass of the adjustable door: 6mm(±5%) toughened safely glass

Pulley block for steel cable:

Pulley fixed seat: pressed by not less than 2mm galvanizing steel, with double-faced wrapped drop-proof design to guarantee its stable.

Pulley: machined of not less than ï¿ 35mm nylon

Balance weight: left and right double balance weight box

Gathering gas hood: High molecular plastic molded, integrated and shaped. The bottom entrance is rectangle, the pipe caliber of the top entrance is about ￠10〞,the height forthe outlet connecting the caliber is not less than50mm for connecting the air duct.

Lighting equipment: all-cover lamp holder(heat dissipation lamp), a glass with a 5mm(±5%) thickness is installed in bottom, a 220V/30W lighting is installed in lamp-cover

Accessories:

Vertical testing faucets

Style for outlet: downward, outlet is copper matrix shaping-nose

Style for valve: knob style

Material: pipe body is made of brass-alloy, acid and alkali resistant, anti-rust for face

Sink for testing: black PP, acid and alkali resistant, anti-corrosion groove, the inside dimension is about L180*W115*D180mm

Controlling system: touching electron switch and electron display screen, solid state relay and logic control circuit.

Main circuit system: 380V three phase current state relay, over current protection and air auto-switch